On the issue of determining hydraulic resistances of tees of metal-polymer pipelines
https://doi.org/10.26897/1997-6011-2023-4-79-85
Abstract
The purpose of the conducted studies is experimental determination of hydraulic resistances of asymmetrical equal-pass tees with α=90° angle in the metal-polymer pipeline, identification of dependencies of local resistance coefficients ζ on the ratio of flow rates of direct passage Q2 and flow rates of assembly hose Q3, their comparison with existing reference data and theoretical dependencies. The article presents the results of experiments and analysis to determine hydraulic resistances in the metal polymer pipeline, provides the method of theoretical determination of resistance coefficients in the metal polymer pipeline VALTEC ISO and the method of determining the values of local hydraulic resistances of an asymmetric equal-pass (supply) T-joint with an angle of α=90•°. The obtained empirical dependencies of the values of the local resistance coefficients of the ζ=f(Q2/Q3) in the asymmetric equal-pass tee with an angle of α=90° in the metal-polymer pipeline from the ratio of the separated flows Q2/Q3 to the branch upwards, to the passage in the straight tee and the division of flows at different internal diameters of the VALTEC ISO pipeline for the range of Reynolds numbers Re =1⋅104 ÷ 3,2 ⋅104 are presented. The obtained empirical relationships were compared with reference data on formulas and experimental data for standard tees with angle α = 90° and tees made of ductile iron on thread α = 90° when dividing liquid flows.
About the Author
M. S. Paliivets
Russian State Agrarian University – MAA named after C.A. Timiryazev
Russian Federation
Russian Federation
Paliivets Maxim Sergeevich, Cand. tech. sciences, associate professor
127454, Moscow, Timiryazevskaya st., 49
AuthorID: 705251
References
1. Cisowska I., Kotowski A. Studies of hydraulic resistance in polypropylene pipes and pipe fi ttings / I. Cisowska, A. Kotowski // Foundations of Civil and Environmental Engineering. 2006. № 8. P. 37-57.
2. Siwiec T., Morawski D., Karaban G. Experimental tests of head losses in welded plastic fi ttings / T. Siwiec, D. Morawski, G. Karaban // Gaz Woda Technika Sanitarna. 2002. 2. P. 49-68.
3. Kutukov S.E. The establishment of pipeline hydraulics: retrospective of researches of hydraulic losses in pipes / S.E. Kutukov, A.I. Golianov, O.V. Chetvertkova // OIJ. – 2019. – Volume 2019, Issue 07. P. 128-133. – DOI 10.24887/0028-2448-2019-7-128-133.
4. Lal A., Morawski D., Chalecki M. Hydraulic and Technological Investigations of a Phenomenon Responsible for Increase of Major Head Losses in Exploited Cast-Iron Water Supply Pipes / A. Lal, D. Morawski, M. Chalecki //. Water. 2021. 13. P. 1604.https://doi.org/10.3390/w13111604.
5. Grachev I.G. Handbook on calculations of hydraulic and ventilation systems / I.G. Grachev, V.M. Nizovtsev, S.Yu. Pirogov N.P. and others. St. Petersburg: ANO NPO “The world and family”, 2001.1154 p.
6. Handbook of Hydraulic Resistance, 3rd Edn. By I.E. Idelchik. Begell House, 1994. 790 pp. ISBN0-8493-9908-4. £138.95 // Journal of Fluid Mechanics. 1998. Vol. 354. P. 376-378.
7. Kovalev-Krivonosov P.A., Zyuban V.A., Umbrasas M. – P. Recommendations for the arrangement of bends and fi ttings as part of blocks and assemblies of ship systems. Sb. Scientifi c and Technical Association named after A.N. Krylov. Leningrad, Sudostroenie Publ., 1978. Vol. 285. P. 95-100.
8. Kalenik М., Chalecki М. Wichowski, P. Real Values of Local Resistance Coeffi cients during Water Flow through Welded Polypropylene T-Junctions / Marek Kalenik, Marek Chalecki and Piotr Wichowski // Water. – 2020.12(3). P. 895. DOI: 10.3390/w12030895.
9. Kalenik M. Empirical Formulas for Calculation of Negative Pressure Difference in Vacuum Pipelines / M. Kalenik // Water. 2015. 7(10). P. 5284-5304.
10. Kalenik M. Real Values of Local Resistance Coefficient During Flow of Water Through Welded Polypropylene Elbows / M. Kalenik // Ochr. Sr. 2019. 41. P. 23-30.
11. Wichowski P., Siwiec T., Kalenik M. Effect of the Concentration of Sand in a Mixture of Water and Sand Flowing through PP and PVC Elbows on the Minor Head Loss Coefficient / P. Wichowski, T. Siwiec, M. Kalenik // Water. 2019.11. P. 828.
12. Basset M., Winterbone D., Pearson R. Calculation of steady flow pressure loss coefficients for pipe junctions / M. Basset, D. Winterbone, R. Pearson // Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2001. P. 861-881.
13. Costa N.P., Maia R., Proença M.F., Pinho F.T. Edge effects on the flow characteristics in a 90 deg Tee junction / N.P. Costa, R. Maia, M.F. Proença, F.T. Pinho // Journal of Fluids Engineering. 2006. Volume 128, Issue 6. P. 1204-1217. https://doi.org/10.1115/1.2354524.
14. Li, A., Chen X., Chen L., Ga, R. Study on local drag reduction effects of wedge-shaped components in elbow and T-junction close-coupled pipes / A. Li, X. Chen, L. Chen, R. Gao // Building Simulation. 2014. 7(2). P. 175-184. DOI: 10.1007/s12273-013-0113-z.
15. Koka F., Myoseb R., Hoffmannb K.A. Numerical assessment of pulsatile flow through diverging tees with a sharp and round-edge junction / F. Koka, R. Myoseb, K.A. Hoffmannb // International Journal of Heat and Fluid Flow. 2019. Volume 76. P. 1-13. DOI: 10.1016/j.ijheatfluidflow.2019.01.008.
16. Kalenik M. Real values of local resistance coefficient during flow of water through welded polypropylene elbows / M. Kalenik // Ochrona Srodowiska. 2019. Vol. 41, No. 1.PP. 23-30.
17. Kalenik M., Witowska B. Research of local hydraulic resistance in PVC fittings / M. Kalenik, B. Witowska // ACTA Scientiarum Polonorium. Architectura. 2007. Issue 6 (3). P. 15-24.
18. Shterenlicht D.V. Hydraulics: textbook. 5th ed., ster. St. Petersburg: “Lan” Publishing House, 2015. 656 p.
19. GOST R ISO 5725-6-2002. Accuracy (correctness and precision) of measurement methods and results. Putting accuracy values into practice. Introduction. 2002-04-23. Moscow: Publishing house of standards, 2002. 43 p.
20. Kalenik М., Chalecki М., Wichowski, P. Real Values of Local Resistance Coefficients during Water Flow through Welded Polypropylene T-Junctions / Marek Kalenik, Marek Chalecki and Piotr Wichowski // Water. 2020. 12(3). P. 895. DOI: 10.3390/w12030895.
21. Kalenik M., Witowska B. Research of local hydraulic resistance in PVC fittings // ACTA Scientiarum Polonorium. Architectura. 2007. Issue 6 (3). P. 15-24.
22. Weinerowska-Bords K. Experimental analysis of local energy loss coefficients for selected fittings and connectors in polymeric multilayer pipe systems / K. Weinerowska- Bords // Instal. 2014. 6. P. 42-49.
23. Rennels D.C., Hudson H.M. Pipe Flow / D.C. Rennels, H.M. Hudson // A Practical and Comprehensive Guide; John Wiley Sons, Inc.: Hoboken, NJ, USA, 2012. 320p. ISBN: 978-0-470-90102-1.
Review
For citations:
Paliivets M.S. On the issue of determining hydraulic resistances of tees of metal-polymer pipelines. Prirodoobustrojstvo. 2023;(4):79-85. (In Russ.) https://doi.org/10.26897/1997-6011-2023-4-79-85
Views:
121
Email this article 