On the design of the structure of a two-stage differential on an elastic base
https://doi.org/10.26897/1997-6011-2024-1-66-73
Abstract
The article discusses a new type of a two-stage differential of the author’s design and the calculation of its design on an elastic base. The drop is designed to regulate the eroded sections of small rivers in the conditions of foothill zones. The proposed frame structure of the construction on an artificial gabion base allows solving the issues of stability, interaction of the structure with the flow and safe filtration under the structure. The bearing base of the drop is a system of cross reinforced concrete beams on an elastic base which allows the use of a method for calculating tape monolithic foundations. At the same time, an effective approach to the study of the stress-strain state of its load-bearing elements is proposed. Based on the results of the conducted studies, the tasks and calculation methodology for calculating its main parameters that ensure the reliability and efficiency of the entire structure have been determined for this two-stage differential.
About the Authors
M. M. KhasanovRussian Federation
Mussa M. Khasanov, candidate of technical sciences, associate professor
Author ID: 1029986
360030 Nalchik, Lenin avenue, 1B
A. A. Sozaev
Russian Federation
Akhmed A. Sozaev, candidate of technical sciences, associate professor
WoS Researcher ID:ААВ-7728-2020; Scopus Author ID: 57219247588; Author ID:805100
360030 Nalchik, Lenin avenue, 1B
S. O. Kurbanov
Russian Federation
Saligadzhi O. Kurbanov, candidate of technical sciences, associate professor
WoS Researcher ID:ААВ-7875-2020; Scopus Author ID: 70062553868; Author ID:361638
360030 Nalchik, Lenin avenue, 1B
A. Fayez
Russian Federation
Alkassir Fayez, postgraduate student
Author ID: 1192226
360030 Nalchik, Lenin avenue, 1B
References
1. SP 23.13330.2018. The foundations of hydraulic structures. Updated version of SNiP 2.02.02-85*. Moscow: Standartinform, 2019. 105 p.
2. SP 58.13330.2019. Hydraulic structures. The main provisions. Updated edition of SNiP 33-01-2003. Moscow: Standartinform, 2020. 39 p.
3. SP 41.13330.2012. Concrete and reinfrced concrete structures of hydraulic structures. Updated version of SNiP2.06.08-87. Moscow: Ministry of Regional Development of Russia, 2012. 72 p.
4. SP 20.13330.2016. A set of rules. Loads and impacts. Updated. revision of SNiP 2.01.07-85*. Moscow: Standartinform, 2018. 95 p.
5. Methodological guide for the design of meliorative spillway structures with a high-speed differential type of coupling of streams (doc. developed in the development of SP 100.13330.2016, approved 01.01.2019 by FAA “FTS”). M., 2019. 57p.
6. Pat. 2633788 RF, IPC E02V3/02. Two-stage differential of a combined structure / S.O. Kurbanov, A.A. Sozaev, S.A. Ulbasheva; application. 12/19/2016; publ. 18.10.2017. Byul. No. 29.
7. Alexandrov A.V., Potapov V.D., Derzhavin B.P. Resistance of materials. M.: Higher School., 2003. 560 s: ill.
8. Handbook of the designer of industrial, residential and public buildings and structures. Computational and theoretical. In 2 books. Book 1. Edited by A.A. Umansky. 2nd edition, reprint. and additional M., Stroyizdat, 1972, 600 p.
9. Sargsyan A.E. Construction mechanics. Fundamentals of theory with examples of calculations / Demchenko A.T., Dvoryanchikov N.V., Jinchvelashvili G.A. M.: Higher School, 2000. 416 p.
10. Gorbunov-Posadov M.I., Malikova T.A. Calculation of structures on an elastic base. M.: Stroyizdat, 1973. 627 p.
11. Zhemochkin B.N., Sinitsyn A.P. Practical methods for calculating foundation beams and plates on an elastic base. Moscow: Gosstroyizdat, 1962. 240 p.
12. Simvulidi I.A. Calculation of engineering structures on an elastic base. M.: Higher School, 1978. 480 p.
Review
For citations:
Khasanov M.M., Sozaev A.A., Kurbanov S.O., Fayez A. On the design of the structure of a two-stage differential on an elastic base. Prirodoobustrojstvo. 2024;(1):66-73. (In Russ.) https://doi.org/10.26897/1997-6011-2024-1-66-73